Pearl
RM672.00 – RM685.76
Pearl Pure Acrylic binder based, nacre additives, pearl-appearance, water-based, first-class, decorative, final coat interior coating. Paint is sold in 3 kg / pack with a coverage of 130 square feet of wall.
Purchase of tools are optional but recommended. For custom colours not given below, please contact us
Please choose the color code and select whether tools is required or not.
Pearl Pure Acrylic binder based, nacre additives, pearl-appearance, water-based, first-class, decorative, final coat interior coating.
Features: Silkcoat Pearl, with a pearl texture, lined or curvy interior coating, has a high covering ability. In addition to being cleanable, it is water-based and does not harm human health and the environment.
Application surfaces: Can be applied to all pre-painted interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.
Technical Information
Structure: Pure Acrylic
Consumption: Single coat: 2 (m² / kg)
Thinner: Water
Thinning Ratio: Applied without thinning. If necessary, max. 10%
Drying Time: Touch, 25 – 30 min;
Dust repulsive 1 hour;
Full drying 24 hours
Packaging
Package Includes:
- 1 x 3kg of Pearl Effect Paint (60 sq ft)
- 1 x Pearl Primer Pack for 60 sq ft
- 1 x Silkcoat Putty Primer (in case of old putties on surfaces)
- 1 x Silkcoat Internal Acrylic Putty
- 1 x Silkcoat İzolac
- 1 x Silkcoat Universal Primer
- 2 x Pearl Application Glass Trowel
- 2 x Drop sheets (for floor and furniture protection)
- 2 x Masking Tape Rolls
- 6 x sheets sandpaper (2 x 100 grain, 2 x 80 grain, 2 x 70 grain)
- 1 x sanding block
Instructional Videos
Application
SURFACE PREPARATION:
- The application surface should be free from all kinds of dust, dirt and oil.
- A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces.
- If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty.
- Silkcoat Universal Primer should be used on new painted and absorbent surfaces, Silkcoat Paste Primer should be used on surfaces that are old painted, dirty or synthetic painted surfaces and putty applied surfaces.
- Silkcoat Pearl is applied on a single layer with glass trowel without being thinned.
- With the help of the glass trowel, the line or fold pattern is obtained.
- Application tools should be cleaned with water after application.
- For new coated surfaces, at least 28 days must be waited for the application of paint to the surface.
PRODUCT PREPARATION:
- Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying
- Before using Pearl, it should be mixed until it becomes completely homogenous
- If applied on very bright and glassy surfaces, a solid surface should be formed by sanding the surface first to ensure better adhesion.
APPLICATION:
- Place drop sheets on floor and over any exposed furniture under surface to be painted
- Apply masking tape to all corners and edges at boundaries of areas to be painted
- Silkcoat Pearl is applied in a single layer with glass trowel without being thinned.
- With the help of the glass trowel, the line or fold pattern is obtained.
- Tools should be cleaned immediately after application.
Safety And Environment
SAFETY AND PERSONAL PROTECTION DURING USE
- Avoid getting eye and skin contact. In case wash with plenty of water
- Preserve in a tightly closed container
- Keep out of the reach of children
SAFE DISPOSAL OF WASTES
- Dispose of properly by washing all equipment and disposing of buckets etc in plastic recycling unit – DO NOT DUMP INTO SEWER SYSTEM
STORAGE:
- Keep in a cool and clean place away from direct sunlight
- NB: It can be stored unopened 1 year at room temperature
