Package Includes:

1. 1 x 3kg of Velvetto Soft Effect Paint (100 sq ft)
2. 1 x Velvetto Soft Primer Pack for 100 sq ft
3. 1 x Silkcoat Putty Primer (in case of old putties on surfaces)
4. 1 x Silkcoat Internal Acrylic Putty
5. 1 x Silkcoat İzolac
6. 1 x Silkcoat Universal Primer
7. 2 x Velvetto Soft Application Decorative Trowel
8. 2 x Drop sheets (for floor and furniture protection)
9. 2 x Masking Tape Rolls
10. 6 x sheets sandpaper (2 x 100 grain, 2 x 80 grain, 2 x 70 grain)
11. 1 x sanding block

SURFACE PREPARATION:

• The surface must be cleared of any oil, dirt or dust and swollen and old paintings must be scraped off – the surface must be clean, dry and solid.
• If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty.
•  If the surface to be applied is flattened with gypsum plaster, Silkcoat İzolac should be used on the surface before Silkomatt application, 
• Use Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces, 
• Silkcoat Putty Primer should be used on surfaces with the putty application.
• Silkomatt is applied as a single layer on the last layer of the same colour as Velvetto Soft. Velvetto Soft is applied to the surface with the help of a roller. The pattern is given to the product by circular movements with the help of a special trowel, without complete drying on the surface. 
• The surface is left to dry for 4-6 hours depending on weather conditions. After the first layer application is applied, the second layer is applied with the help of a Velvetto Soft decorative trowel or roller to form a thin layer on the surface. 
• After application, the surface is patterned with circular motions with the help of a special trowel. Tools should be cleaned immediately after application.

PRODUCT PREPARATION:

1. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying
2. Before using Velvetto Soft, it should be mixed until it becomes completely homogenous
3. If applied on very bright and glassy surfaces, a solid surface should be formed by sanding the surface first to ensure better adhesion.

APPLICATION:

1. Place drop sheets on floor and over any exposed furniture under surface to be painted
2. Apply masking tape to all corners and edges at boundaries of areas to be painted
3. Silkomatt is applied as a single layer on the last layer of the same colour of Velvetto Soft. Velvetto Soft is applied to the surface with the help of roller. The pattern is given to the product by circular movements with the help of a special trowel, without complete drying on the surface. 
4. The surface is left to dry for 4-6 hours depending on weather conditions. After the first layer application is applied, the second layer is applied with the help of a Velvetto Soft decorative trowel or roller to form a thin layer on the surface. 
5. After application, the surface is patterned with circular motions with the help of a special trowel. 
6. Tools should be cleaned immediately after application.

SAFETY AND PERSONAL PROTECTION DURING USE 

• Avoid getting eye and skin contact. In case wash  with plenty of water
• Preserve in a tightly closed container
• Keep out of the reach of children

SAFE DISPOSAL OF WASTES

• Dispose of properly by washing all equipment and disposing of buckets etc in plastic recycling unit – DO NOT DUMP INTO SEWER SYSTEM

STORAGE: 

• Keep in a cool and clean place away from direct sunlight NB: It can be stored unopened 1 year  at room temperature